7
EN
G
LIS
H
Positioning Your Cricut
™
Personal Electronic Cutter
™
Place your Cricut™ machine at least 6" from the edge
of your table to prevent it from tipping and causing
possible injury.
When positioning your Cricut™ machine, choose a location that is:
• Inaccessible to children. The Cricut™ machine is not a toy and contains
components, including a sharp blade, that could be hazardous to children.
• Stable, flat, and hard-surfaced, within 6 feet (1.8 meters) of a grounded electrical
outlet, and that has a minimum clearance of 1 foot (30.5 cm) around the Cricut™
machine for paper movement.
• Indoors or in a dry location where the Cricut™ cartridges are not directly exposed to
the effects of the weather.
• Away from direct exposure to sunlight or extreme temperatures such as in parked
cars, storage sheds, sunrooms, etc.
What Your Cricut
™
Machine Can Cut
The Cricut™ Personal Electronic Cutter™ can cut a wide range of paper from vellum to
cardstock up to 0.5 mm thick. Provo Craft has created cardstock pads and designer
paper pads that coordinate with the Cricut™ shape cartridges. These 6" x 12" papers fit
perfectly in the Cricut™ machine.
Basic Operations
Set-Up
Plug your Cricut™ machine into a grounded
electrical outlet, and turn it on by pressing the
On button to the right of the machine door.
The doors of the machine will open when the
On button is pressed. If the doors do not open,
use gentle pressure to open the Cricut™
machine’s door completely.
Place the keypad overlay on top of the
machine’s keypad.
TIP: The repeated cutting of heavy cardstock and similar weights of paper may reduce
the life of your Cricut™ machine’s cutting blade and mat.
WARNING! Your Cricut™ machine should never be left or stored outside, in un-heated or
un-air conditioned locations, or in environments where the machine or cartridges can
come in contact with water.
6"
