Crestron
TSW-RMB
Retrofit Mounting Brackets for TSW-750 & TSW-1050
Installation Guide – DOC. 7609A
Retrofit Mounting Brackets for TSW-750 & TSW-1050: TSW-RMB
•
9
Installation without a Back Box
For applications where there is no existing back box, use the following installation
procedure:
1.
Use the four included #04-40 x 3/4” screws (2029110) to loosely attach the
TSW-RMB to the included mounting brackets. Install the screws only
enough to engage the threads in the mounting brackets. Do not tighten them
yet.
2.
Push the assembly into the wall until the brackets are fully seated and “clip”
to the wall.
3.
Tighten the four screws to secure the TSW-RMB.
The following illustration shows a TSW-750 touch screen installation using a
TSW-750-RMB-1 with its included mounting brackets but installation without a
back box is similar for all TSW-RMB models.
TSW-RMB Installation without Back Box
