Crestron
TPS-CBL-S3/6/9
Siamese Cable for TPS/Tilt Panel
Cable/Port Signals
For the TPS-CBL-S3/6/9 Siamese cable/port signals, refer to the tables
below.
NET/VIDEO Plug Pin-Outs
PIN
DESIGNATION
DESCRIPTION
1
+24V
Power (Network)
2
GND
Ground (Network)
3
C+
Chrominance (Positive)
4
C-
Chrominance (Negative)
5
Y
Data (Network)
6
Z
Data (Network)
7
Y+
Luminance (Positive)/Composite
8
Y-
Luminance (Negative)/Composite
9
GND
Ground (Network)
10
+24V
Power (Network)
AUDIO Plug Pin-Outs
PIN
DESIGNATION
DESCRIPTION
1
L+
Left Input (Positive)
2
L-
Left Input (Negative)
3
S
Shield
4
R+
Right Input (Positive)
5
R-
Right Input (Negative)
6
S
Shield
7
M+
Microphone Output (Positive)
8
M-
Microphone Output (Negative)
Cable Connections
NOTE:
When connecting the video from the TPS-IMC Interface Module
(or optional TPS-IMW) to the touchpanel, exceeding a video cable length
30-feet will significantly degrade the signal. To maintain high-quality
video,
DO NOT
daisy-chain cables, Crestron TPS-BLOCK devices or
fabricate cables longer than 30-feet. For further information about
TPS-BLOCK devices, consult an appropriate installation guide that can be
obtained from the Products page (PRODUCT MANUALS section,
hardware section) or Downloads page (MANUAL Library) of Crestron’s
website (www.crestron.com). New users are required to register to obtain
access to the FTP site.
Installation Guide - DOC. 6009
Siamese Cable for TPS/Tilt Panel: TPS-CBL-S3/6/9
•
3
