Crestron
TPS-6X Series
Isys 5.7” Wireless Touch Screens
Operations Guide – DOC. 6875C
Isys 5.7” Wireless Touch Screens: TPS-6X Series
•
35
DIAGNOSTICS
The
Diagnostics
button on the MAIN MENU should only be used under the
supervision of a Crestron customer service representative during telephone support.
Many options available on the “DIAGNOSTICS” menu, shown in the following
illustration, are numeric in nature and their interpretation is beyond the scope of this
manual.
“DIAGNOSTICS” Menu
Hardware Hookup
The TPS-6X comes in a soft felt bag to protect it during shipping.
The TPS-6X does not require any connections for wireless operation but does need
to be acquired by a CEN(I)-ERFGW-POE gateway (sold separately). Refer to
“WIRELESS” which starts on page 26 and to the “Operation” section of the latest
version of the CEN-ERFGW-POE Extended Range RF Wireless Gateway
Operations & Installation Guide (Doc. 7158) for details.
For Cresnet or Ethernet connection or to upgrade touch screen firmware, the TPS-6X
must be placed on the TPS-6X-DS (or with TPS-6X-LP models, the TPS-6X-DS-LP
or with TPS-6XNL models, the TPS-6XNL-DS) Docking Station, which must be
connected to the TPS-6X IMCW Interface Module (both included), which in turn
must be connected to a control system via Cresnet or Ethernet. For details, refer to
the latest version of the TPS-6X-DS & TPS-6XNL-DS Operations Guide (Doc.
6876) or the TPS-6X-DS-LP Installation Guide (Doc. 7142) and the TPS-6X-IMCW
Installation Guide (Doc. 6874).
Make the necessary connections as called out in the illustrations on the following
pages. Refer to “Network Wiring” on page 11 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the TPS-6X-IMCW, use Crestron power supplies for
Crestron equipment.
To mount the TPS-6X, the touch screen must first be positioned onto the docking
station at a slight angle to latch the top portion of the docking station onto the touch
screen. Magnets on the TPS-6X-DS (and TPS-6XNL-DS) attach to metal plates
installed on the TPS-6X to secure the touch screen in place (refer to the following
illustration).