quickstart guide
TPMC-3SM & TPMC-3SMD
www.crestron.com
888.273.7876
201.767.3400
Specifications subject to
change without notice.
TPMC-3SM & TPMC-3SMD
2.8” Touch Screens
QUICKSTART DOC. 7238B (2031721, Sheet 1 of 2) 04.13
2
2
Establish Communication
Use Crestron Toolbox™ for communicating with the TPMC-3SM and TPMC-3SMD;
refer to the Crestron Toolbox help file for details.
There is a single method of communication: TCP/IP communication.
Ethernet Communication
NOTE:
During regular operation of the touch screen, there are two ways to
activate the setup functions:
1. Place a button on the project main page and assign the reserved join
number (17242) that activates setup.
2. Press hard keys 1, 2, 3 and 4, under the touch screen display, in
sequence twice (i.e. press 1, 2, 3, 4, 1, 2, 3, 4) within a five second period.
The setup screens are the starting point for
configuring the TPMC-3SM and TPMC-3SMD.
When power is applied for the first time, the
screen shown to the right appears.
3
Configure the Touch Screen
NOTE:
The only connection required to configure the touch screen is power.
Refer to step 2 in section
“Installation” for details.
Touch the screen to display the TPMC-3SM or
TPMC-3SMD “Panel Setup Options” screen, as
shown in the illustration to the right. The setup
screens enable basic configuration procedures
prior to regular operation of the touch screen.
NOTE:
For details on configuring the TPMC-3SM and TPMC-3SMD, refer to
the latest version of the TPMC-3SM & TPMC-3SMD Configuration Guide (Doc.
7269). It is available from the Crestron Web site (www.crestron.com).
1
2 3
4
For Regulatory Compliance information, refer to the latest
version of Doc. 7237.
PC Running
Crestron Toolbox
LAN
Power
Injector
CRES
TRON
CEN-
SW-
POE
-5
Power o
ver E
thern
et Swi
tch
Uplink
PoE
1
2
3
4
48VD
C
Pow
er
120 Volts
POE
TPMC-3SM(D)
1
The TMPC-3SM or TPMC-3SMD connects to PC via Ethernet:
1. Use the Device Discovery Tool (click the icon) in Crestron Toolbox to detect all Ethernet
devices on the network and their IP configuration. The tool is available in Toolbox version
1.15.143 or later.
2. Click on the TMPC-3SM or TPMC-3SMD to display information about the device.
