Crestron
Touch The PC Driver
Software
Touch the PC V2 Operation via Cresnet Communications
•
Install Touch the PC V2 software (page 3)
•
Connect COM port of PC to a COM port of control system with null
modem cable (page 7)
•
In SIMPL Windows (page
):
- Assign touchpanel serial output signals
- Assign control system two-way serial driver signals
- Save, compile, and load the project to the touchpanel
•
In VT Pro-e (page 14):
- Set the RGB object to PAD 1 or PAD 2
- Set the project properties according to the RGB selected PAD area
Select:
Touch the PC, V2
Communication via:
Cresnet
Serial Join:
1
(example)
Touch the PC V2 Operation via Ethernet Communications
•
Install Touch the PC V2 software (page 3)
•
Connect COM port of PC to COM port of control system with null modem
cable (page 9)
•
Establish Ethernet communications between touchpanel and control system
and add a device ID to touchpanel IP table and control system (page 11)
•
In SIMPL Windows (page 13):
- Assign touchpanel serial output signals
- Assign control system two-way serial driver signals
- Save, compile, and load the project to the touchpanel
•
In VT Pro-e (page 14):
- Set the RGB object to PAD 1 or PAD 2
- Set the project properties according to the RGB selected PAD area
Select:
Touch the PC, V2
Communication via:
TCP/IP
Serial Join:
1
(example)
Device ID:
3
(example)
- Save, compile, and load the project to the touchpanel
Driver Software Installation
To install the Touch the PC V2 software, download the files from the Downloads |
Software Updates | Touchpanels page of the Crestron website
Search for
Touch The PC Driver, V2.
This file will create a UPDD folder plus the
PDF version of this programmer’s guide and a Release Notes document.
NOTE:
Crestron recommends that the baud rate for both the touchpanel and PC
port be set at the default rate of
9600
,
N81
.
Open the UPDD Driver
folder and run
setup.exe
. The name of the pointer device
can be changed from the default "Device 1" to "Crestron Touchpanel.” In the “Port”
Programmer’s Guide – DOC. 5916B
Touch the PC Driver
•
3
Summary of Contents for Touch The PC Driver
Page 4: ......
