Attach Bezel
Bezel
Acrylic
face
SSW
assembly
5.
Slide the bezel retained during the disassembly carefully over
the acrylic face until the magnets on the bezel snap into place
against the SSW assembly.
NOTE:
The bezel can be attached as shown or inverted with
the wider portion at the top and the narrower portion at the
bottom.
Additional Information
Scan or click the QR code for detailed product information on the
Crestron website.
SSW-ACR-102
Compliance and Legal
Original Instructions:
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Model: SSW
The product warranty can be found at
www.crestron.com/warranty
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
.
Certain Crestron products contain open source software. For specific information, please
visit
www.crestron.com/opensource
.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Crestron disclaims any proprietary interest
in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2019 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Quick Start - Doc. 7968B
(2053687)
03.19
Specifications subject to
change without notice.
