Crestron
QM-FTCMK
FlipTop
Cable Management Kit
Installation
The QM-FTDC, QMI-FTDC, QM-FTCC, QMI-FTCC, QM-FTMC and
QMI-FTMC are shipped with a blank bottom plate. The FlipTop Cable
Management Kit provides a six-hole plate for user access, and two 6-foot
cables (computer and computer audio).
Parts Supplied with Optional Cable Management Kit
PART DESCRIPTION
QUANTITY
Small Cable Bushing, 5/16 inch ID,
0.5 inch OD
4
Large cable Bushing, 0.55 inch ID,
0.80 inch OD
2
Cable Support Plate
1
Tie Wrap
3
Computer RGB Cable, VGA to VGA,
6 ft long
1
Computer Audio Cable, 3.5 mm Stereo,
6 ft long
1
Tools Required
•
Phillips screwdriver
•
Small flat-blade screwdriver (for connecting the VGA cable)
The cable support plate should be installed before mounting the FlipTop
box to a surface. The cables are looped through the cable support plate.
1. Remove the blank bottom plate and retain the four #4 x ¼ LG black
mounting screws.
2. Place the bushings on the cables (six bushings supplied). Use the
large bushing for the VGA cable.
3. Thread the cables through the appropriate slots on the plate.
4. Snap the bushings into the plate slots.
5. Feed all the excess cable through the opening.
6. Attach the plate using the four #4 x ¼ LG black screws retained in
step 1.
Installation Guide - DOC. 6314A
FlipTop Cable Management Kit: QM-FTCMK
•
3
