Crestron
QM-FTCC
FlipTop Computer Center
NOTE:
<
AttackTime>
and <
DecayTime>
are applied to both microphone
inputs.
NOTE:
The gating level indicators will still function even if the gating function
is not enabled.
NOTE:
Nominal indication is reported at 20 dB below input clip level. Clip
indication is reported at 6 dB below input clip level.
NOTE:
Returned values match values that were selected for the
<
Mic1GatingLevel>
, <
Mic2GatingLevel
>, <
Mic1Gain>
, <
Mic2Gain>
,
<
AttackTime>
and <
DecayTime>
inputs.
NOTE:
Refer to page 41 for adjustment details of the microphone inputs.
Buttons
The Buttons module is built into slot 03 of the QM-FTCC. It consists of a
keypad 10 to 20 buttons with LED indicators, and two bar graphs. The button
presses are fixed and map to <press> outputs on the symbol detail, as follows:
Row 1
Row 2
Row 3
Row 4
PWR
NET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
NOTE:
Numbers in this illustration are for programming purposes only.
NOTE:
Not applicable to NB models.
The buttons on rows 1 and 2 can be combined vertically to form one larger
button. For example, the button caps for buttons #1 and #6 can be replaced with
one larger button cap. Similarly, the vertical pairs on rows 3 and 4 can be
combined to form one larger button. For example, buttons #13 and #18 can be
combined. No other combinations are valid. That is, two buttons cannot be
combined horizontally; the buttons on rows 2 and 3 cannot be combined.
Operations & Installation Guide – DOC. 6313A
FlipTop Computer Center: QM-FTCC
•
39
