Crestron MPS-300 Operation Manual Download | Manualshive

Page: 35 / 96

background image

Crestron

MPS-300

Multimedia Presentation System 300

Programming Software

Have a question or comment about Crestron software?

Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at

http://support.crestron.com

.

First-time users will need to establish a user account.

Earliest Version Software Requirements for the PC

NOTE:

Crestron recommends that you use the latest software to take advantage of

the most recently released features. The latest software is available from the Crestron
website.

NOTE:

Crestron software and any files on the website are for authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).

Crestron has developed an assortment of Windows

®

-based software tools to develop

an MPS-300 system. For the minimum recommended software versions, visit the
Version Tracker page of the Crestron website (

www.crestron.com/versiontracker

Programming with Crestron SystemBuilder

Crestron SystemBuilder is the easiest method of programming but does not offer as
much flexibility as SIMPL Windows. For additional details, download
SystemBuilder from the Crestron website and examine the extensive help file.

Any program created for the MPS-300 with SystemBuilder will include the out-of-
the-box functionality in addition to any additional programming created with
SystemBuilder.

Programming with SIMPL Windows

NOTE:

While SIMPL Windows can be used to program the MPS-300, it is

recommended to use SystemBuilder for configuring an MPS-300 system.

SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.

Any SIMPL Windows program written for an MPS-300 will contain all of the
MPS-300’s out-of-the-box functions in a protected area of the program. The parts of
the program that contain the out-of-the-box functions are locked and cannot be
changed or deleted. When a program is compiled, the custom program plus the out-
of-the-box front panel functionality, including setup menus, are loaded.

NOTE:

Visit Crestron’s True Blue Support on the web for programming tips.

Operations Guide – DOC. 6529B

Multimedia Presentation System 300: MPS-300

•

31

«
...
33
34
35
36
37
...
»

Summary of Contents for MPS-300

































































































Reviews:

No comments

Related manuals for MPS-300

Brand: Hama Pages: 2

MMAC-Plus 9F116-01

Brand: Cabletron Systems Pages: 4

Brand: Caberg Pages: 16

Brand: Caberg Pages: 3

Brand: Caberg Pages: 2

Brand: FeiYu Tech Pages: 34

Brand: Kargo Master Pages: 5

Brand: OFFCARR Pages: 12

Brand: OEM Tools Pages: 4

FireCracker CK17A

Brand: X10 Pages: 1

Brand: Waycon Pages: 8

Brand: Wavetronix Pages: 4

Brand: X10 Pages: 2

Brand: EUROM Pages: 28

Brand: Xerox Pages: 2

Brand: Xpand Pages: 24

Brand: Yaesu Pages: 2

Brand: Yamaha Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands