manually pushing the “Eject/Stop” button on the VCR
player.
3.
Remove the tape that was inside the VCR player.
4.
Replace with desired VCR.
5.
Control from buttons directly on front of VCR player.
6.
Eject VCR tape by pushing “EJECT/STOP” button.
NOTE:
If the tape reaches the end before you
press “STOP” the unit automatically stops,
rewinds and ejects the tape.
DOC CAM:
1.
Open the compartment on the side to access the
Document Camera.
2.
Pull up the camera and the camera arm. The camera
should aim at the center of the Visual Presenter.
3.
Press and hold the [LAMP RELEASE] on both sides of the
Visual Presenter and push the latches forward to pull
up the lamp arm.
4.
Turning the folded lamp arm toward the platform as in
the direction of the arrow.
5.
Place an object to be displayed under the camera.
6.
Press [POWER] on the remote control or control panel
to power on.
7.
Press [AUTO TUNE] on the control panel to optimize the
image. You are ready to present.
8.
Each time the camera head is moved, press [AF] on the
remote control to refocus the lens.
9.
Turn off Doc Cam.
10.
Lower camera to original position.
TURN OFF SYSTEM WHEN FINISHED
