Media Presentation Controller
Crestron
MPC-M10/20/25
Supplied Hardware
The hardware supplied with the MPC-M10/20/25 is listed in the following table.
Supplied Hardware for the MPC-M10/20/25
DESCRIPTION PART
NUMBER
QUANTITY
Mounting Plate with Ground Wire
4506280
1
Button Identification Labels, Sources, 100
4509400
1
Button Identification Labels, Actions, 100
4509402
1
Screws, 06-32 x 3/4”, Combo Head
2009211
4
Screws, 04-40 x 1/4”, Pan, Phil
2007156
2
Screws, 04-40 x 1/2”, Btn Head
2021395
4
Prod Tool, 1/16” Allen Wrench, L-Key
2022867
1
Installation
The following tools are required for installation of an MPC-M10/20/25:
•
Standard 3-gang electrical box (not included)
•
Philips screwdriver
•
1/16” Allen wrench (included)
After the wiring has been installed and verified, use the following procedure to
install the MPC-M10/20/25 in a standard, 3-gang electrical box.
1. Turn
system
power
OFF
.
2. Use the four included 06-32 x3/4” screws to attach the mounting plate to the
electrical box.
16
•
Media Presentation Controller: MPC-M10/20/25
Operations & Installation Guide – DOC. 6701C
