Single/Dual-Channel Wireless Mic Receiver
Crestron
MP-FS-RX1/RX2
2
•
Single/Dual-Channel Wireless Mic Receiver: MP-FS-RX1/RX2 Operations & Installation Guide – DOC. 7164B
Specifications
Specifications for the MP-FS-RX1/RX2 are listed in the following table.
MP-FS-RX1/RX2 Specifications
SPECIFICATION
DETAILS
Communications
Wireless
RF
2.4 GHz ISM Device; 79 channels, FHSS
(2402 to 2480 MHz)
IR
38 kHz (requires MP-FSIR IR Beacon Sensor*)
Range (typical)
50 ft (~15 m) indoor, subject to site-specific
conditions
Wired
USB
USB host port for firmware update and
configuration
Audio
A-D/D-A Conversion
16-bit, 44.1 kHz
Master Volume Range
-55 dB to +20 dB
Bass Gain Range
±15 dB @ 100 Hz
Treble Gain Range
±15 dB @ 10k Hz
Ducking Adjustment
Software adjustable Threshold, Depth, Attack,
and Release
Alert Tone
Software configurable functionality
Frequency Response
20 Hz to 20 kHz ±0.5 dB
S/N Ratio
75 dB 20 Hz to 20 kHz A-weighted
THD+N
0.7% 20 Hz to 20 kHz
Output Power
15 Watts per channel at 8 or 4 Ohms
Amplifier Protection
Electronic short-circuit and overload protection
Power Requirements
Power Pack
2.0 Amps @ 24 Volts DC, 100-240 Volts AC,
50/60 Hz power pack, included
Environmental
Temperature
41° to 104° F (5° to 40° C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
35 BTU/Hr
Enclosure
Chassis
Metal with polycarbonate label overlay
Faceplate
Plastic with polycarbonate label overlay
Mounting
Freestanding
Dimensions
Height
2.36 in (60 mm)
Width
8.12 in (207 mm)
Depth
5.95 in (152 mm)
(Continued on following page)
Summary of Contents for MP-FS-RX1
Page 4: ......
