background image

Crestron 

MMK-12L & WMKM-12L

 

 

Mud Mount Kits

 

the clearance holes in the plate and are secured in the extruded holes of 
the fastener plates. 

11.  Verify that the plate is level before tightening. 

NOTE:

  Do not over tighten screws. Doing so may over-dimple or rip the plate. 

12.  Use a #2 Phillips screwdriver and tighten the drywall screws by hand 

so that they slightly dimple into the holes in the mud ring plate. 

13.  Run the necessary cables for the touchpanel and secure them behind the 

drywall. 

14.  Apply drywall joint compound as needed to finish the cutout. Avoid 

covering the four tapped mounting holes. 

15.  When dry, the touchpanel can be installed using the four tapped holes 

in the mounting plate. Refer to the latest revision of the  
TPS-12L/15L/17L Operations Guide (Doc. 6355) or TPS-12G/15G-L 
Operations Guide (Doc. 6356) for details. 

Further Inquiries 

If you cannot locate specific information or have questions after reviewing this 
guide, please take advantage of Crestron's award winning customer service team by 
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. 
For assistance in your local time zone, refer to the Crestron website 
(www.crestron.com) for a listing of Crestron worldwide offices.  

You can also log onto the online help section of the Crestron website to ask 
questions about Crestron products. First-time users will need to establish a user 
account

 

to fully benefit from all available features.

 

As of the date of manufacture, the MMK-12L and WMKM-12L have been tested 
and found to comply with specifications for CE marking. 

 

Future Updates 

As Crestron adds improvements to the MMK-12L or WMKM-12L, additional 
information may be made available as manual updates. These updates are solely 
electronic and serve as intermediary supplements prior to the release of a complete 
technical documentation revision.  

Check the Crestron website periodically for manual update availability and its 
relevance. Updates are identified as an “Addendum” in the Download column. 

 

 

Installation Guide – DOC. 6359 

Mud Mount Kits:  MMK-12L & WMKM-12L  

  7 

Summary of Contents for MMK-12L













Reviews: