Crestron
MT-1000C
3.8 Inch RF Remote
SIMPL Windows is the Crestron graphical, Windows
®
-based development tool
for programming control systems. The SIMPL Windows interface provides two
workspaces: the Configuration Manager, for configuring the control system,
touchpanels, and controlled network devices; and Program Manager, for
designing the logic and functionality of the control system.
In addition, you can use the powerful Crestron Toolbox utility to accomplish
multiple system tasks, such as uploading the program to the control system and
performing diagnostic functions. Together with the Crestron Database, these
tools provide you with the essential components you need to program the
MT-1000C.
NOTE:
The MT-1000C is shipped with a CD that contains ActiveSync. This
must be installed, and your computer rebooted, before running Toolbox. Refer to
page 2.
NOTE:
The information in this section assumes that the reader has knowledge
of SIMPL Windows. If not, refer to the extensive help information provided
with the software.
This section describes a sample SIMPL Windows program that includes an
MT-1000C remote control.
NOTE:
In the following programming example, a PRO2 2-Series processor is
used as the control system.
Configuration Manager is where programmers “build” a Crestron control system
by selecting hardware from the
Device Library
. In Configuration Manager, drag
the PRO2 from the Control Systems folder of the
Device Library
and drop it in
the upper pane of the
System Views
. The PRO2 with its associated
communication ports is displayed in the
System Views
upper pane.
Pro2 System View
The
System Views
lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
Programming Guide – DOC. 6330A
3.8 Inch RF Remote: MT-1000C
•
5
Summary of Contents for MiniTouch MT-1000C
Page 1: ...Crestron MT 1000C 3 8 Inch RF Remote Programming Guide...
Page 4: ......
