Crestron
TPMC-4X
Isys
i/O
™
Handheld WiFi Touchpanel
“WLAN Settings” Window – Config Tab
NOTE:
There must be only a single dedicated WAP listed in the
Preferred Networks
list.
Select the
IP Info
tab to display IP addresses and other information relating to the
network. (Refer to the following figure.) Use the
Renew
button at the bottom of the
screen to renew the lease for the IP address if you are connected by DHCP. (Note:
not supported by Crestron.)
The
Ping
and
Trace
buttons activate screens that are used to test the connectivity of
the network, and let you see all the intermediate points in the network, respectively.
The screens are shown on the following page.
“WLAN Settings” Window – IP Info Tab
Operations Guide – DOC. 6499
Isys i/O
™
Handheld WiFi Touchpanel: TPMC-4X
•
15