As of the date of manufacture, the device has been tested and found to comply with
specifications for CE marking.
Product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2016 Crestron Electronics, Inc.
Crestron Electronics, Inc.
Installation Guide - DOC. 8186D
15 Volvo Drive, Rockleigh, NJ 07647
(2002188)
Tel: 888.CRESTRON
12.16
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Hardware Hookup
Insert the IRP2’s 2-pin connector into an infrared-serial output port of a control system
or a room solution box as shown in the following illustration.
IRP2 Connection Diagram
NOTE
: The white-traced wire is positive (+) and connects to the pin labeled “S.”
As of the date of manufacture, the device has been tested and found to comply with
specifications for CE marking.
Product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2016 Crestron Electronics, Inc.
Crestron Electronics, Inc.
Installation Guide - DOC. 8186D
15 Volvo Drive, Rockleigh, NJ 07647
(2002188)
Tel: 888.CRESTRON
12.16
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Hardware Hookup
Insert the IRP2’s 2-pin connector into an infrared-serial output port of a control system
or a room solution box as shown in the following illustration.
IRP2 Connection Diagram
2-pin connector
IR port
(S G S G)
IR sensor
window
Optical Disk Player
Crestron DM-RMC-200-C
NOTE
: The white-traced wire is positive (+) and connects to the pin labeled “S.”
2-pin connector
IR port
(S G S G)
IR sensor
window
Optical Disk Player
Crestron DM-RMC-200-C