QUICKSTART DOC. 7054B (2028482) 12.12
2
quickstart guide
www.crestron.com
888.273.7876
201.767.3400
Specifications subject to
change without notice
IC-300-CSP-P
Complete Classroom AV System Package
CBL-AUDIO-RCAF-0.5
The specific patents that cover Crestron products are listed at
patents.crestron.com.
Crestron, the Crestron logo, the Crestron C logo, IntelliClass, RoomView
Connected, and SystemBuilder are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. IDEAL and OminSeal are either trademarks or registered
trademarks of IDEAL INDUSTRIES, INC. in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims proprietary interest in the
marks and names of others.
©2012 Crestron Electronics, Inc.
IntelliClass
™
IC-300-CSP-P
LGR
Red
Green
Blue
Black
CBL-KVGA-L-P-50
WP-131
CBL-KAV-RCAM3-L-P-50
WP-100
Rear
LGR
Rear
Terminate with supplied BNC
compression fittings.
Red
Green
Blue
Black
Red
Green
Blue
Black
Gray
TYPICAL PROJECTOR
Red
Green
Blue
LAN
L R
+ - + -
Terminate with supplied
RCA compression fittings.
CBL-KAUDIO-RCAM2-L-P-50
Twist shields together and
insert into
G
terminal of
3-pin detachable
connector (supplied).
Terminate with
supplied RCA
compression fittings.
MPC-M5
MP-AMP30
PWE-4803RU
Red
Green
Blue
Black
Gray
WP-131
CBL-KAUDIO-RCAM2-L-P-50
Terminate with supplied BNC
compression fittings.
Twist shields together and
insert into
G
terminal of
3-pin detachable
connector (supplied).
RCA - RCA Cable
Included w/MP-AMP30
CBL-AUDIO-RCAF-0.5
LAN PoE
CBL-KSERIAL-DB9-L-P-50
CBL-AUDIO-RCAF-0.5
NOTE:
Projector volume is
controlled via the MPC-M5.
LAN
If the Crestron C logo ( ) is present on the projector,
then it is part of the RoomView Connected Devices family, and
supports advanced direct connectivity with the MPC-M5.
Utilizing the projector’s built in LAN port, the MPC-M5 can
directly interface with the projector, offering a host of advanced
monitoring and configuration options that far exceed the
capabilities of basic serial and IR control. This great feature
eliminates the need to use the provided
CBL-KSERIAL-DB9-L-P-50. For more information, please refer
to the following Web site:
www.crestron.com/intelliclass
.
For use with projectors that are not part of
the RoomView Connected
®
devices family.
Cable
contains
either a
white wire
or a yellow
wire.
Strip the ends of the wires
approximately 3/8 inch (12 mm).
Observe the correct polarity (
+
(red)
to
+
terminal and
-
(black) to
-
terminal) and insert into the two
2-pin detachable connectors
(supplied).
CBL-SPK-P-35
Strip the speaker end of the
cable wires approximately
5/8 inch (15 mm) and twist
the bared strands.
Use the wire nuts supplied
with the speakers to
connect the speaker wires
with the speaker cable
wires, (red to red and black
to black). Refer to Doc.
7070 supplied with the
speakers for details.
FSDI8-W
3
Typical Hookup Arrangement