Crestron
C2N-MNETGW
infiNET™
Gateway/Transceiver
Operations Guide – DOC. 6317B
infiNET™ Gateway/Transceiver: C2N-MNETGW
•
9
When installing a C2N-MNETGW near other C2N-MNETGWs, keep in
mind the following for optimum performance:
•
Do not place multiple gateways on the same channel. Refer to
“Operating Channel” on page 17 for more information.
•
Gateways on adjacent channels should be at least 12 feet apart.
•
Gateways on non-adjacent channels should be at least three feet
apart.
When installing a C2N-MNETGW near a Wi-Fi access point, keep in
mind the following for optimum performance:
•
Gateways on infiNET channels adjacent to operating Wi-Fi
channels should be placed at least 12 feet from the nearest
Wi-Fi access point.
•
Gateways on infiNET channels that are non-adjacent to Wi-Fi
bands should be located at least six feet from the nearest Wi-Fi
access point.
For more information on infiNET channels and their interaction with the
Wi-Fi spectrum, refer to “Appendix A: The infiNET Spectrum” on page
28. Information on optimal gateway placement can be found in
“Appendix B: Optimum RF Reception Guidelines” on page 29.
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Refer to “Network Wiring” on page 8 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
