Crestron
IM-FTCC-B
iMedia FlipTop Computer Center
Installation
Cable Management Kit
The IM-FTCC-B and IMI-FTCC-B are shipped with a cable management kit
that includes a cable management plate, a 6-foot VGA cable and a 6-foot audio
cable.
Tools Required
•
Phillips screwdriver
•
Small flat-blade screwdriver (for connecting the VGA cable)
Parts Supplied with Cable Management Kit
PART DESCRIPTION
QUANTITY
Small Cable Bushing, 5/16 inch ID, 0.5 inch OD
2
Large cable Bushing, 0.55 inch ID, 0.80 inch OD
1
Cable Support Plate
1
4-40 ¼ inch Phillips Head Screws
4
Computer RGB Cable, VGA to VGA, 6 ft long
1
Computer Audio Cable, 3.5 mm Stereo, 6 ft long
1
Tie Wraps
3
The cable support plate must be installed before mounting the IM-FTCC-B or
IMI-FTCC-B to a surface. The cables are looped through the cable support plate.
1. Place the bushings on the cables (three bushings supplied). Use the
large bushing for the VGA cable.
2. Thread the cables through the appropriate slot on the plate.
3. Snap the bushings into the plate slots.
4. Feed all the excess cable through the opening.
5. Attach the plate using the four #4 x 1/4 black screws.
6. Connect the cables to the appropriate connector on the bottom of the
IM-FTCC-B/IMI-FTCC-B.
7. The cables may be secured to the bottom bar using tie wraps.
Operations & Installation Guide – DOC. 6349A
iMedia FlipTop Computer Center: IM-FTCC-B
•
13