Configure the Device
Using the web interface, configure the HD-RX-4K-510-C-E or
HD-RX-4K-410-C-E. The device also hosts the configuration of the
connected DM Lite transmitters.
To access the web interface, open a web browser and then go to the IP
address of the HD-RX-4K-510-C-E or HD-RX-4K-410-C-E. By default,
DHCP is enabled. To display the IP address on the connected HDMI
display, press the SETUP button on the front panel of the device. If a
transmitter has a SETUP button, pressing the button on the transmitter
will also display the IP address of the HD-RX-4K-510-C-E or HD-RX-4K-
410-C-E.
To log in to the web interface, enter the user name and password.
The default user name and password are both
admin
.
Upgrade the Firmware
Before using the device, upgrade the firmware. The latest firmware can be
downloaded from the HD-RX-4K-510-C-E and HD-RX-4K-410-C-E
product pages on the Crestron website (
).
Connect to the Cloud
The Crestron XiO Cloud™ service allows supported Crestron devices
across an enterprise to be managed and configured from one central and
secure location in the cloud. Supported devices are preconfigured to
connect to the service. Use of the service requires a registered Crestron
XiO Cloud account.
To connect the device to the Crestron XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or rear panel of the device. The MAC address and serial
number are required in order to add the device to the Crestron XiO
Cloud environment.
2. Do either of the following:
l
If you have a Crestron XiO Cloud account, go to
to access the Crestron XiO Cloud service.
l
If you do not have a Crestron XiO Cloud account, go to
www.crestron.com/xio-cloud-registration
to register for an
account.
For detailed information about using the Crestron XiO Cloud service,
refer to the Crestron XiO Cloud Service User Guide (Doc. 8214) at
HD-RX-4K-510-C-E and HD-RX-4K-410-C-E
Quick Start
6
