Rear Bracket Installation - FT2-1400 Series FlipTop
(2) Screws
(included)
Bracket
(included)
FT2-1400 Series
FlipTop
Attach Cable Retractor and Power Supply Holder
Each installed bracket provides two sets of four slots for up to two cable retractors and one
set of four slots for a power supply holder. Use the following drawings for visual reference.
Installed FT2A-CBLR-BRKT-1200 (left) and FT2A-CBLR-BRKT-1400 (right)
Slots for
power
supply
holder
Slots for
cable
retractors
Slots for
power
supply
holder
Slots for
cable
retractors
Additional Information
Scan or click the QR code for detailed product information on the Crestron website.
FT2A-CBLR-BRKT-1200 FT2A-CBLR-BRKT-1400
Compliance and Legal
The product warranty can be found at
www.crestron.com/warranty
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource
.
Crestron, the Crestron logo, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc.
in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used
in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
©2018 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Quick Start - Doc. 8383A
(2052678)
11.18
Specifications subject to
change without notice.
