Crestron FT-TSC600 FlipTop Page 40 Operations & Installation Manual Download

Page: 40 / 48

FlipTop Touch Screen Control System

Crestron

FT-TSC600

•

FlipTop Touch Screen Control System: FT-TSC600

Operations & Installation Guide – DOC. 7593A

TCP/IP

Ethernet Communication

PC Running

Crestron Toolbox

LAN

Power

Injector

CRE

STRON

CEN-

SW-PO

E-5

wer

er Eth

ern

et Sw

itch

Upl

ink

PoE

48V

Powe

120 Volts

POE

FT-TSC600

The FT-TSC600 connects to PC via Ethernet:

Use the Device Discovery Tool (click the

icon) in Crestron Toolbox to

detect all Ethernet devices on the network and their IP configuration. The

tool is available in Toolbox version 1.15.143 or later.

Click on the FT-TSC600 to display information about the device.

Programs, Projects, and Firmware

Program, project, or firmware files may be distributed from programmers to

installers or from Crestron to dealers. Firmware upgrades are available from the

Crestron website as new features are developed after product releases. One has the

option to upload programs and projects via the programming software or to upload

and upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer

to the Crestron Studio help file, SIMPL Windows help file, VT Pro-e

help file, or

the Crestron Toolbox help file.

Crestron Studio /

SIMPL Windows

If a Crestron Studio (or SIMPL Windows) program is provided, it can be uploaded to

the control system using Crestron Studio (or SIMPL Windows) or Crestron Toolbox.

Crestron Studio / VT Pro-e

Upload the Crestron Studio (or VT Pro-e) file to the touch screen using Crestron

Studio (or VT Pro-e) or Crestron Toolbox.

Firmware

Check the Crestron website to find the latest firmware. (New users must register to

obtain access to certain areas of the site, including the FTP site.)
Upgrade FT-TSC600 firmware via Crestron Toolbox.

Establish communication with the FT-TSC600 as described in “Establishing

Communication” on page 35.

Select

Tools

Package Update Tool…

to upgrade the FT-TSC600

firmware or double click on an appropriate Package Update File (PUF)

located on the hard drive. The Package Update Tool is loaded as a

standalone application.

Summary of Contents for FT-TSC600 FlipTop

















































Search results

Summary of Contents for FT-TSC600 FlipTop

Reviews:

Related manuals for FT-TSC600 FlipTop

Brands by name

Popular brands

Crestron FT-TSC600 FlipTop, Operations & Installation Manual

Search results

Summary of Contents for FT-TSC600 FlipTop

Reviews:

Related manuals for FT-TSC600 FlipTop

Brands by name

Popular brands