Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without
prior authorization from CRESTRON. To obtain warranty service for
CRESTRON products, contact an authorized CRESTRON dealer. Only
authorized CRESTRON dealers may contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note
specifying the nature of the problem, name and phone number of contact
person, RMA number and return address.
2. Products may be returned for credit, exchange or service with a
CRESTRON Return Merchandise Authorization (RMA) number. Authorized
returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive,
Rockleigh, N.J. or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee
plus shipping costs on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be
paid by CRESTRON, shipping by standard ground carrier. In the event
repairs are found to be non-warranty, return freight costs shall be paid by
the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use for a
period of three (3) years from the date of purchase from CRESTRON, with the
following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1)
year; touch screen display and overlay components are covered for 90 days;
batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an
authorized CRESTRON dealer. Purchasers should inquire of the dealer
regarding the nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product
has been used in any application other than that for which it was intended or if
it has been subjected to misuse, accidental damage, modification or improper
installation procedures. Furthermore, this warranty does not cover any product
that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser.
In no event shall CRESTRON be liable for incidental or consequential damages
of any kind (property or economic damages inclusive) arising from the sale or
use of this equipment. CRESTRON is not liable for any claim made by a third
party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective,
without charge for parts or labor. Repaired or replaced equipment and parts
supplied under this warranty shall be covered only by the unexpired portion of
the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other
warranties, expressed or implied, nor authorizes any other party to offer any
warranty, including any implied warranties of merchantability or fitness for a
particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement
supersedes all previous warranties.
Crestron, the Crestron logo, and FreeSpeech are trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and other countries. Other trademarks, registered trademarks, and trade
names may be used in this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others.
©2011 Crestron Electronics, Inc.
INSTALLATION / OPERATION
Installation/operation of the MP-FSDS2 consists of the following:
1. Select an appropriate location (tabletop, desk, shelf).
2. Connect the supplied power pack to line power and then
to the MP-FSDS2.
3. The green LED on the docking station indicates power is applied.
NOTE:
Disconnect the power pack from line power when the docking
station is not in use.
4. Insert one or two MP-FSMIC* wireless microphones into the
docking station to be charged. Charging can take up to two
hours. When the battery is fully charged, the mic's Status LED
blinks green.
For additional information, refer to the latest version of the
MP-FSMIC Installation Guide (Doc. 7166), which is available from
the Crestron Web site (www.crestron.com/manuals).
* Item sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
