Adjust the Retractor
When the retractor arm is in the desired orientation, the retractor arm
tension and the cable retraction speed may be adjusted (vertical
orientation shown below).
Adjust the Retractor Tension
1. Loosen the top thumb screw enough so that the adjacent cable end
may move freely.
2. Align the red screw with the arrow on the label.
Adjust the Cable Retraction Speed
The Cable Retraction Speed Adjust knob may be set in one of four
positions: slowest, slow, fast, and fastest.
When the cable retractor arm is in the vertical orientation, the cable
retracts quickly. When the cable retractor arm is in the horizontal
orientation, the cable retracts slowly as it turns the corner of the
retractor neck to the retractor arm. Refer to
on the next page.
6
CBLR2 Series
Quick Start
FlipTop™ Cable Retractors
