Web Interface Guide — Doc.
DM-NVX-352(C) • 5
Easy Configuration Guide
A DM-NVX-352(C) device can be configured to function as a network AV transmitter (encoder) or
receiver (decoder):
l
As a transmitter, a DM-NVX-352(C) device allows a laptop computer, camera, or other
media source to be connected via an HDMI cable and then transmitted over the network.
l
As a receiver, a DM-NVX device receives the signal from a DM-NVX encoder and feeds the
signal to a display device via the HDMI output. A DM-NVX decoder can switch among
multiple DM-NVX encoders on the network alongside locally connected HDMI sources.
To configure a DM-NVX device as an transmitter or receiver, follow the instructions below.
How to Configure DM-NVX-352(C) as a Transmitter
1. Navigate to the STREAM page and select Transmitter from the Mode drop-down list.
2. Select Yes when prompted to reboot the device so the device can be properly configured as a
transmitter.
NOTE:
You will be required to login after the device reboots.
Summary of Contents for DM-NVX-352
Page 5: ...IR Settings 76 Web Interface Guide Doc Contents iii ...
Page 6: ...iv Contents Web Interface Guide Doc ...
Page 46: ...40 DM NVX 352 C Web Interface Guide Doc Output page of DM NVX 352 C in Receiver mode ...
Page 84: ...This page is intentionally left blank Web Interface Guide Doc DM NVX 352 C 78 ...