10
•
DM-MD8X1-4K-C and HD-MD8X1-4K: 4K Scaling Auto-Switchers
Supplemental Guide – DOC. 7718B
EDID
EDID (Extended Display Identification Data) configuration allows management of the EDID
that is to be sent to the upstream device connected to the VGA or HDMI input of the
DM-MD8X1-4K-C or HD-MD8X1-4K-C. If an EDID other than the default EDID is desired,
use the web interface to configure the EDID. An overview of the steps necessary to
configure the EDID is as follows:
NOTE:
For detailed information, refer to the online help of the web interface.
1.
(Applicable to custom EDID file only) Using an FTP client such as FileZilla, load a
custom EDID file to the DM-MD8X1-4K-C or HD-MD8X1-4K-C:
a.
Connect to the device using the IP address of the device. A list of folders
appears for the device.
b.
Select the EDID folder.
c.
Copy the desired custom EDID file to the EDID folder, and then continue with
step 2.
2.
In the web interface, do the following:
a.
On the Main Setup page, click the input whose EDID is to be configured.
The Input Configuration page for the selected input opens.
b.
Click the Configure EDID button. The EDID Setup page opens.
c.
Click Crestron EDID List for a list of predefined Crestron EDID files or User
EDID List for a list of custom EDID files.
d.
Select the desired EDID.
EDID Setup Page
Summary of Contents for DM-MD8X1-4K-C
Page 4: ......
