Product Manual — Doc. 9259A
DM Lite® 4K60 4:4:4 Extenders • 55
Wall Plate Device Installation
This section provides information about installing and making connections to DM Lite wall plate
transmitters and receivers.
In the Box
Qty.
Description
1
DM Lite transmitter or receiver, wall plate
Additional Items
HD-TX-4KZ-101-1G(-B, -W), HD-TX-4KZ-111-1G(-B, -W), and HD-RX-4KZ-101-1G-B Only
2
Screw, 6-32 x 3/4 in. Truss Head, Combo (2009211)
HD-TXA-4KZ-101-1G-B Only
2
Screw, 6-32 x 3/4 in. Truss Head, Combo (2009211)
1
Connector, 5-Pin (2003577)
HD-TXC-4KZ-101-1G(-B, -W) and HD-RXC-4KZ-101-1G-B Only
2
Screw, 6-32 x 3/4 in. Truss Head, Combo (2009211)
1
Connector, 3-Pin (2003575)
1
Connector, 4-Pin (2003576)
HD-TX-4KZ-211-2G(-B, -W) Only
4
Screw, 6-32 x 3/4 in. Truss Head, Combo (2009211)
Installing a Wall Plate Device
Mount the wall plate device into an electrical box (not included) or onto a single rack rail.
Mounting into an Electrical Box
DM Lite wall plate devices are either 1-gang or 2-gang devices. For installation instructions, refer
to
Installing a 1-Gang Wall Plate Device
or
Installing a 2-Gang Wall Plate Device
as applicable to
the DM Lite device.
Installing a 1-Gang Wall Plate Device
To install a 1-gang wall plate device into an electrical box: