DigitalMedia™ CAT & Fiber Transmitters 100
Crestron
DM-TX-100/-F
IP Configuration
If the DM-TX-100/-F is used in a standalone configuration (not connected to a DM
switcher), use Crestron Toolbox to create the IP table of the DM-TX-100/-F:
NOTE:
If the DM-TX-100/-F connects is connected to a DM switcher, the IP table
entry of the DM-TX-100/-F is created automatically.
1.
Use the Device Discovery Tool to find the IP address of the
DM-TX-100/-F. Then, in the Toolbox, display the “System Info” window
(click the
icon) and select the DM-TX-100/-F entry from the Address
Book.
2.
Select
Functions | IP Table Setup
.
3.
Add, modify or delete entries in the IP table. The DM-TX-100/-F can have
only one IP table entry.
4.
A defined IP table can be saved to a file or sent to the device.
24
•
DigitalMedia™ CAT & Fiber Transmitters 100: DM-TX-100/-F
Operations Guide – DOC. 6810C
