Crestron
DM-MD6X1
6X1 DigitalMedia™ Switcher
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
12
DM OUT D/M
4, 5, 6
(1) DM CAT output composed of (2) 8-pin
RJ-45 female, shielded;
Connect to DM CAT input of a DM
receiver/room controller, switcher, or other
DM device via DM-CBL cable
13
HDMI OUT
(1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Carries same audio and video signals as
DM OUT
14
USB HID
(1) USB Type B female;
USB 1.1 device port for connection to the
USB host interface of a computer or other
USB HID-compliant host device
15
LAN
6
GREEN
LED
YELLOW
LED
PIN 8
PIN 1
(1) 8-pin RJ-45 female with two LED
indicators;
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
PIN
SIGNAL
PIN
SIGNAL
1
TX +
5
N/C
2
TX -
6
RX -
3
RX +
7
N/C
4
N/C
8
N/C
16
SETUP (rear)
(Button and LED
(1) Red LED and (1) miniature recessed
push button for Ethernet auto-discovery
17
AUDIO IN 1 – 2
(2) 5-pin 3.5 mm detachable terminal blocks;
Balanced/unbalanced stereo line-level
inputs;
AUDIO IN 1
and
SPDIF IN 1
inputs are
mutually exclusive;
Input Impedance: 24k Ohms
balanced/unbalanced
Balanced Input Level: 4 V
rms
maximum
Unbalanced Input Level: 2 V
rms
maximum
18
SPDIF IN 1
(1) RCA female, S/PDIF coaxial digital audio
input;
SPDIF IN 1
and
AUDIO IN 1
inputs are
mutually exclusive;
Input Impedance: 75 Ohms
19
AUDIO OUT
7
(1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level
output, variable level;
Output Impedance: 200 Ohms balanced,
100 Ohms unbalanced
Maximum Output Level: 4 V
rms
balanced,
2 V
rms
unbalanced
(Continued on following page)
Operations Guide – DOC. 6850D
6X1 DigitalMedia™ Switcher: DM-MD6X1
•
13
