Crestron DigitalMedia DM-MD16X16-CPU3, Product Manual, Page: 54 / 80

50 • DigitalMedia Switchers Product Manual – DOC. 8418A
Using the Front Panel LCD
The front panel LCD provides the Installer Tools menu, which consists of the following
menu items:
• Inputs
• Outputs
• Network Setup
• Control Setup
Access the Installer Tools Menu
To access the Installer Tools menu:
1. Press the MENU button. The Enter Password prompt appears on the LCD.
Enter Password:
0000
< >
2. Using the selection knob, enter each digit in the password. If the password
contains digits greater than 0 and less than 9, IN 1-8 buttons can also be used to
enter the digits.
When using the selection knob, press the > soft button to move the cursor to the
right after entering a digit. To move the cursor to the left (if necessary), press the
< soft button.
The default password is 1234.
3. Press the ENTER button. The password is saved, and the Installer Tools menu
appears on the LCD.
NOTE: The password can be changed by following the Control Setup > Password
menu path.