Supplemental Guide – DOC. 7318F
DM-MD64X64/DM-MD128X128: DigitalMedia Switchers
•
15
ACT LED: Green LED, indicates CPU activity
MSG LED: Red LED, indicates CPU has generated an error message
CPU RESET: Recessed push button, reboots the CPU and front panel
LAN: 8-pin RJ-45 female, shielded, with two LED indicators;
10BASE-T/100BASE-TX/1000BASE-T Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
DANTE: 8-pin RJ-45 female, shielded, with two LED indicators;
1000BASE-T Dante network port;
Green LED indicates Dante network link status;
Amber LED indicates Dante network activity
NOTE:
Dante audio networking requires that the DM switcher be equipped with one or
more Dante enabled input or output blades (models DMB-4K-I-HD-DNT and
DMB-4K-O-HD-DNT, respectively).
NOTE:
If required, the DANTE port can be repurposed as a Service port. To repurpose
the DANTE port as a Service port, refer to Answer ID 5347 in the Online Help section of
the Crestron website (
USB: USB Type A female; USB 2.0 host port for connection of a USB flash drive;
For saving or loading of configuration and EDID settings and for updating firmware
AUDIO OUT: 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line level output;
Output Impedance: 200 Ω balanced, 100 Ω unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
