CRESTRON
Jumper Location and Pin Positions
PIN 2
PIN 1
PIN 3
RJ45
BNC
J9
U7
J9
SW1
Y3
U
9
Y4
Y2
J6
J1
5. Replace cover onto CNXVGA and secure with four scews and four
washers.
Preparation for Use
Connections to the CNXVGA vary slightly depending on whether the unit is being
used with a VT-3500 or VT-3500L. Refer to the two hookup diagrams after this
paragraph. Other than making the power connection last, complete the connections
in any order.
NOTE:
Before making any connections, review latest revision of network
interconnection drawing (Doc. 5411) when making connections to the port labeled
NET.
CNXVGA Hookup Connections with VT-3500
CONNECT TO
VT-3500
(USE SUPPLIED CABLE
ASSEMBLY, P/N 15709)
NOT
USED
CONNECT TO
ANY RGB SOURCE
CONNECT TO
VIDEO SOURCE
CONNECT TO
OTHER CRESTRON
EQUIPMENT
CONNECT TO
CONTROL SYSTEM
The CNXVGA has been specifically designed to replace the VT-3500IMC when
connected to the VT-3500. Use four screws (#8-32, not supplied) to stabilize the
CNXVGA to a flat surface.
6
•
Expanded Video Adapter: CNXVGA
Operations Guide - DOC. 8134A
