background image

Crestron 

CNX-PBVR4

 

 Professional Balanced Video Receiver

 

Problem Solving 

Troubleshooting 

In the event of poor quality or missing signal output at one or more distribution 
points supplied by circuits that include the CNX-PBVR4, and troubleshooting 
procedures for the other devices in the network do not resolve the problem, do the 
following: 

1.  Verify existence of input signals(s) from the CNXRMCLV. 

2.  Verify that the correct (24 VDC, 1A) external Power Pack is properly 

connected, and that the front panel PWR indicator is illuminated. 

3.  Verify pinouts on CAT5 cable connectors. Make sure crimping is secure 

and that there are no shorts. 

4.  Verify that all CAT5 input cables and RCA output cables are securely 

connected.  

5.  After determining which of the four signal groups may be at fault, either 

perform the Video Input Compensation procedures (discussed on page 7)
or swap the input and output cables between the groups to locate the 
source of the trouble. If further assistance is required, please contact a 
Crestron customer service representative.  

Further Inquiries 

If after reviewing this Operations Guide for the CNX-PBVR4, you cannot locate 
specific information or have questions, please take advantage of Crestron's award 
winning customer service team in your area. Dial one of the following numbers.  

• 

In the US and Canada, call Crestron's corporate headquarters at  
1-888-CRESTRON [1-888-273-7876].  

• 

In Europe, call Crestron International at +32-15-50-99-50. 

• 

In Asia, call Crestron Asia at +852-2341-2016. 

• 

In Latin America, call Crestron Latin America at +5255-5093-2160. 

• 

In Australia and New Zealand, call Crestron Control Solutions at  
+61-2-9737-8203. 

Future Updates 

As Crestron improves functions, adds new features, and extends the capabilities of 
the CNX-PBVR4, additional information and programming examples may be made 
available as manual updates. These updates are solely electronic and serve as 
intermediary supplements prior to the release of a complete technical documentation 
revision.  

Check the Crestron website (

www.crestron.com

) periodically for manual update 

availability and its relevance. Updates are available from the Downloads | Product 
Manuals section and are identified as an “Addendum” in the Download column. 

Operations Guide – DOC. 8184 

Professional Balanced Video Receiver: CNX-PBVR4 

  9 

Summary of Contents for CNX-PBVR4

















Reviews: