Digital Video Processor
Crestron
CNX-DVP4
For flexibility in designing applications, the CNX-DVP4 can be controlled by a
variety of pointing devices, including a serial mouse or touch-sensitive screen
overlay connected via RS-232.
The breakthrough 2-Series control engine is based on the 257 MIPS, 32-bit Motorola
ColdFire
processor. The standard 68MB memory (32MB SDRAM, 4MB flash
ROM, 32MB compact flash) can be enhanced by replacing the supplied compact
flash with a larger flash memory, allowing: an on-board storage of program, room
and equipment profiles, upgrades, databases, and schedules.
The internal 10/100 BaseT Ethernet supports static IP and future dynamic
addressing, TCP/IP and UDP/IP. The built-in Web Server uses memory storage on a
compact flash card for remote access and control.
NOTE:
The CNX-DVP4 is a complex device containing a powerful processor,
touchpanel and A/V controller. When there are conflicting commands between these
functions, the CNX-DVP4 will always allow the controller priority.
Specifications
The following table provides a summary of specifications for the CNX-DVP4.
CNX-DVP4 Specifications
SPECIFICATION DETAILS
Power Requirements
50 Watts¹ (2A @ 24 VDC) Power supply not included
Default Mode
Slave - ID 54
Processor
2-series class processor with built-in compact flash (32Mb)
2-Series Control
System Update File
for
CNX-DVP4
Version CNX-DVP4.2006.CUZ or later for Cresnet Master or Slave
Cresnet
Standard 4-pin
Ethernet
10/100BaseT RJ45 with built in Link/Activity LEDs
Memory
4MB flash (non-volatile), 32MB DRAM (volatile), and 256KB
NVRAM. Ships with 32MB Compact Flash
Output Resolutions
(DVI-I/RGB adapter
included)
800x600 to 1600x1200 (RGB) or 800x600 to 1280x1024 (digital)
Output rate selectable from 60Hz to 85Hz (60Hz limit at
1600x1200). Console commands can be used to configure output
to most non-interlaced formats from 25MHz to 160MHz clock up to
1600x1200.
RGB Input Interface
4 DVI connectors for RGB/LVDS video (RGBHV, RGBS and
RGsB supported)
RGB Input Resolutions
(DVI-I/RGB adapters
included)
From 640x480 to 1600x1200 analog
From 640x480 to 1280x1024 DVI digital
Mouse input
Microsoft compatible serial mouse, 9-pin D connector
2
Aspect ratio
4 x 3 or 16 x 9
Output Interface
DVI connector for analog RGB and digital LVDS video
Horizontal Frequency
From 15KHz to 100KHz
Vertical Frequency
From 50 to 85Hz
Video Inputs
8 BNC connectors for NTSC/PAL (8 composite, 4 S-Video or any
combination)
Video input selection
12 total (4 RGB, 8 composite or 4 S-Video) inputs, any 4 can be
displayed simultaneously
Operations Guide – DOC. 8170A
2
•
Digital Video Processor: CNX-DVP4
