Crestron
CNX-AUDIO-6PAK
Six-Zone
Audio
Package
For example, a CD might automatically be assigned to port C of an IR card. To place
this device on port D, simply click the
Configure
button, select the Port Assignment
tab from the "Device Settings" window, and choose a new port assignment.
The
Controller
area displays all control information about the device that controls
the currently selected device. For example, if the selected device is an IR controlled
CD, the controller may be an IR card such as the CNXIR-8. The top line of text
displays a description of this controlling device. The list box shows all controllers to
which the current device may be assigned. There are three buttons to modify the
contents of the list box.
•
Click the
Configure
button to modify the controller location in the
control system.
•
Click the
New
button to add a controller to the list assuming a valid
controller is available.
•
Click the
Remove
button to remove the currently selected controller
from the list. Some controllers (i.e., built-in cards) cannot be removed.
NOTE:
Expert users can always modify any of the device properties directly in
SIMPL Windows, after the program is generated.
Properties
The Properties tab of the "Device # Properties" window, shown after this paragraph,
lists a set of values for specified functions. Crestron recommends that the default
values are used, but the programmer is free to alter them. Click the
OK
button to
apply and save any changes made and close the window. The
Cancel
button closes
the window without saving any changes that have been made.
NOTE:
This tab is not available for all devices.
"Device # Properties" Window – Properties Tab
Operations & Installation Guide - DOC. 8169
Six-Zone Audio Package: CNX-AUDIO-6PAK
•
11