Crestron CLS-SLVS1 User Manual Download Page 9

 

CLW-SW1, SWS1, & SLVS1(W/A/B)

 

Return and Warranty Policies 

Merchandise Returns / Repair Service 

1.  No merchandise may be returned for credit, exchange, or service without prior authorization from 

CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized 
CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an 
RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the 
problem, name and phone number of contact person, RMA number, and return address. 

2.  Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise 

Authorization (RMA) number. Authorized returns must be shipped freight prepaid to 
CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number 
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA 
number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute 
discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an 
RMA. 

3.  Return freight charges following repair of items under warranty shall be paid by CRESTRON, 

shipping by standard ground carrier. In the event repairs are found to be non-warranty, return 
freight costs shall be paid by the purchaser. 

CRESTRON Limited Warranty 

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and 
workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, 
with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and 
power supplies are covered for a period of one (1) year; touchscreen display and overlay components are 
covered for 90 days; batteries and incandescent lamps are not covered.  
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. 
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. 
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any 
application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, 
modification, or improper installation procedures. Furthermore, this warranty does not cover any product that 
has had the serial number altered, defaced, or removed.  
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall CRESTRON 
be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising 
from the sale or use of this equipment. CRESTRON is not liable for any claim made by a third party or made by 
the purchaser for a third party.  
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or labor. 
Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired 
portion of the warranty. 
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, 
nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or 
fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of 
this limited warranty. This warranty statement supersedes all previous warranties. 
 

Trademark Information

 

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of 
Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.  

Installation Guide – DOC. 6251A 

Stand Alone Wall Box Switch:  CLW-SW1, SWS1, & SLVS1  

  9  

 

Summary of Contents for CLS-SLVS1











Reviews: