16 • CAEN-UMP1X2-DIN-PWS
Product Manual — Doc. 9310A
CAEN-UMP1X2-DIN-PWS in a 7x2 Enclosure
Wire the CLX and DIN Rail Products
Make connections to the CAEN-BLOCK (sold separately), CLX module (sold separately),
DIN-PWS30-277, DIN-AP4, and DIN-HUB.
WARNING: To avoid fire, shock, or death, turn off power at circuit breaker or fuse and test
that power is off before wiring!
NOTES:
l
Install and use the assembly in accordance with appropriate electrical codes and
regulations.
l
A licensed electrician must install the assembly.
l
When installing in an enclosure, group high-voltage devices separately from low-
voltage devices.
l
Use copper wire only. For high-voltage connections, use wires rated for at least 75 °C.
l
Ensure the devices are properly grounded.
l
Restore power after all connections have been made.
