8 • CAEN-UMP1X2-DIN-PWS
Product Manual — Doc. 9310A
Installation
The CAEN-UMP1X2-DIN-PWS mounting kit is comprised of a CAEN-UMP1X2 mounting plate
with a preinstalled DIN rail and DIN-PWS30-277 power supply. The following sections discuss
how to connect a
and
(both sold separately).
NOTE: Before installing DIN products, use a small flat-head screwdriver to loosen the end
clamp screw, then remove the end clamp. Once all connections have been made, reattach
the end clamp and retighten the screw. Refer to step 2 of
Install the DIN-AP4 on page 10
In the Box
Qty.
Description
1
CAEN-UMP1X2-DIN-PWS, CAEN Automation Enclosure Mounting Kit for 4-Series™
Automation Processor and Hub
Additional Items
1
Cable, 4-Wires, 6 in. (153 mm), Round (4519362)
1
Cable, 5-Wires, PCB Connectors, 18 in. (457 mm), Flat (4531268)
1
Cable, 2 -Wires, 2-Pin Terminal Block Connector, 8 in.(203 mm), Round (4534582)
1
Cable, 4-Wires, 4-Pin Terminal Block Connectors, 6 in.(152 mm), Round (4534585)
1
Wire, Ground, 16 AWG, Ring Connectors, 4 in. (4534586)
3
Wire, Jumper, 22 AWG, Red (2007810)
1
Washer, Lock (2007667)
1
Washer, Flat (2007663)
5
Screws, 8-8B x 1/4 in., Pan Head, Phillips (2007277)
6
Tie Wraps (2005429)
