Crestron C2N-SSC-2, Operations & Installation Manual

Page: 6 / 44

ILT Shade Controller Crestron C2N-SSC-2
2
•
ILT Shade Controller: C2N-SSC-2 Operations & Installation Guide - DOC. 6318
The upper and lower limits of travel for each shade are set up at the time
of installation via the six pushbuttons on the face of the Shade Controller,
or via a touchpanel, and are stored internally to each ILT motor. Shade
presets, stored as values relative to the limits of travel, can be stored and
recalled locally in the Shade Controller.
Specifications
The following table provides specifications for the Shade Controller.
Specifications for the Shade Controller
SPECIFICATION DETAILS
Cresnet power usage 1 Watt (42 mAmp @ 24 VDC)
Default Net ID 0C
Control System Update Files
1
2-Series Control System
CEN/CN-TVAV
CNMSX-AV/Pro
CNRACKX/-DP
CNMS, CNRACK, CNLCOMP
ST-CP
Version C2-2004.CUZ or later
2
Version 5.13.12V.UPZ or later
3
Version 5.12.63X.UPZ or later
3
Version 5.10.11W.UPZ or later
3
Version 3.18.09m, l, c or later
Version 4.02.04S.UPZ or later
3
Operating Temperature 41° to 122°F (5° to 50°C)
Humidity 10% to 90% RH (non-condensing)
Overall Dimensions Width: 2.14 in (5.44 cm)
Height: 0.94 in (2.39 cm)
Depth: 3.83 in (9.73 cm)
Weight 0.25 lb (0.11 kg)
1. The latest software versions can be obtained from the Downloads | Software
Updates section of the Crestron website ( www.crestron.com ). Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest
Crestron Product Catalog for a complete list of 2-Series control systems.
3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the
website may be .zip or self-extracting .exe files containing the .cuz or .upz file. To
avoid program problems, make sure you are using the update file with the correct
suffix letter (e.g., S, V, W, X).
NOTE : Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers