Intercom Interface Mounting Kit
Crestron
C2N-IIF-SPMK
Assembly
Tools Required
•
#2 Phillips tip screwdriver
•
Tin Snips (for installation with a rough-in box)
Complete the following procedure in the order provided.
NOTE:
When installing the C2N-IIF-SPMK with Holovision’s keypad-
equipped plates, refer to Diagram A. For all other compatible Holovision
plates, refer to Diagram B.
NOTE:
Observe the orientation of all components in the assembly
diagrams to ensure proper fit.
1. Using the supplied 3/4” screws, washers, and 3/8” spacers,
mount the microphone to the indicated location on the door
station plate as shown in the following diagram. Tighten the
screws ¾ turn after making contact with the washers. Do not
overtighten.
Securing the Microphone
4
•
Intercom Interface Mounting Kit: C2N-IIF-SPMK
Installation Guide - DOC. 6265
