Crestron
BB-17L
Wall Mount Back Box
Mounting
CAUTION:
A two-foot air gap above and below the back box is required when
positioning the BB-17L.
NOTE:
To maintain optimum structural integrity, Crestron recommends installing
header and footer studs around the BB-17L and the required air gap. Refer to the
following illustration for recommended installation.
NOTE:
The BB-17L requires a 17-inch wide space between the studs where it is to
be placed. The BB-17L will not fit otherwise.
Framing the BB-17L
16"
16"
AIR
GAP
BB-17L
AIR
GAP
HEADER
FOOTER
16"
17"
24"
24"
STUD
16"
NOTE:
The BB-17L can be framed to the right of a stud as shown in the above
diagram or to the left. The BB-17L must be mounted to both studs.
Required Tools:
•
#2 Phillips tip screwdriver or hammer
•
Level
Installation Guide - DOC. 6367A
Wall Mount Back Box: BB-17L
•
5
