Crestron BB-15L, Installation Manual

Page: 9 / 12

Crestron BB-15L Wall Mount Back Box
Refer to the following illustration for cutout dimensions.
Drywall Cutout Dimensions
~13
7
64
in
(333 mm Max)
DO NOT EXCEED
THIS DIMENSION
~12
61
64
in
(329 mm Max)
~12
3
4
in
(324 mm Max)
~
5
64
in
(2 mm Max)
~
3
16
in
(5 mm Max)
Ø ~
3
16
in
(5 mm Max)
TYP (4X)
~6
13
64
in
(158 mm Max)
~13
1
2
in
(343 mm Max)
DO NOT EXCEED
THIS DIMENSION
~3
21
32
in
(93 mm Max)
~1
5
64
in
(28 mm Max)
TYP (4X)
CAUTION: A 12-inch (minimum) air gap above and below the touchpanel is
required when positioning the BB-15L.
NOTE: Confirm that the eight tapped holes on the front of the back box are exposed
to accept the touchpanel mounting screws.
NOTE: Cut the drywall to the inside edge of the front of the back box and notch
where needed for the screwholes.
5. Complete the installation by either installing the touchpanel, leaving
the hole open (if permitted by local building codes), or installing the
supplied cover plate with the included #6-32 x 1½” screws. If the
touchpanel is to be installed, refer to the latest revision of the
TPS-12L/15L/17L Operations Guide (Doc. 6355), TPS-12G/15G-L
Operations Guide (Doc. 6356), or the TPMC-15/17-L Series
Operations Guide (Doc. 6354) for installation instructions.
Installation Guide - DOC. 6362A Wall Mount Back Box: BB-15L
•
5