Monitor Operation
Use the status indicators and VU meters on the front panel to monitor
each speaker output.
LEDs in the STATUS section indicate the following for each output:
l
Presence of a fault
l
An overcurrent condition
l
A DC offset condition
l
Excessive operating temperature
l
70 volt operation (100 volt operation for the AMPI-8075 and
AMPI-8150
LEDs in the VU section indicate the signal level of each output and
whether a clipping condition is present.
Reset the Device
Press RESET on the front panel to restart the device.
Connect to Crestron XiO Cloud
Service (Optional)
The Crestron XiO Cloud™ service allows supported Crestron devices
across an enterprise to be managed and configured from one central and
secure location in the cloud. Supported devices are preconfigured to
connect to the service. Use of the service requires a registered Crestron
XiO Cloud account.
NOTE:
The device can be disconnected from the service using the
Cloud Services tab in Crestron Toolbox™ software (Functions > Device
Info > Cloud Services). For details, refer to the Crestron Toolbox help
file.
To connect the device to the Crestron XiO Cloud service:
1. Record the MAC address and serial number labeled on the shipping box
or rear panel of the device. The MAC address and serial number are
required in order to add the device to the Crestron XiO Cloud
environment.
2. Do either of the following:
l
Access the Crestron XiO Cloud service at
l
Register for a Crestron XiO Cloud account at
.
For detailed information about using the Crestron XiO Cloud service,
refer to the Crestron XiO Cloud Service User Guide (Doc. 8214) at
6
AMP(I)-8075 and AMP(I)-8150
Quick Start
Crestron® 8-Channel Commercial Amplifiers
