58 • AirMedia® Series 3 Receivers
Product Manual — Doc. 9020B
l
Miracast Connection Modes: Select one of the radio buttons (Infrastructure, WiFi Direct
Only, or Both) to configure how a Mircast capable device connects to the receiver.
o
Select Infrastructure to connect via the local area network. When selected, Wi-Fi is
used for discovery only.
o
Select WiFi Direct Only to connect via a Wi-Fi point-to-point connection (Wi-Fi
Direct® connection). When selected, Wi-Fi is used for discovery and for streaming.
o
Select Both to connect via a local area network or Wi-Fi point-to-point connection
(Wi-Fi Direct® connection). When selected, a Wi-Fi point-to-point connection only
occurs if the local area connection fails.
NOTE:
When WiFi Direct Only or Both is selected, Login Code Mode must be set to
Random or Fixed as described in
.
Security
Select Security to configure device security and authentication settings.
Security – Authentication Management
l
SSL Mode: Select an SSL (Secure Sockets Layer) mode to use for establishing a secure
connection between the receiver and the control system:
o
Encrypt and Validation: The receiver will require a username and password to
validate an encrypted SSL connection. Enter a username and password in the
respective fields.
o
Encrypt: The receiver will use an encrypted SSL connection.
o
OFF: The receiver will not use an SSL connection
