Configuration
NOTE: The configuration of this device requires a working
knowledge of the AM-200, AM-300, or the CCS-UC-1. Refer to the
AM-200/-300 Product Manual (Doc. 8254) or the CCS-UC-1
Product Manual (Doc. 7844) at
for further
information regarding each product.
Use a web browser to navigate to the IP address or host name of the
host device.
1. After signing in, click on the AIRMEDIA link in the left-hand pane.
2. In the Miracast section, set Miracast to Enabled. A dialog box
prompting a device reboot will appear after Miracast is enabled.
Select Yes.
3. Set the Default Windows Experience to Miracast so that instructions
tailored to Miracast will appear when starting the presentation. A
dialog box prompting a device reboot will appear after Miracast is set
as the Default Windows Experience. Select Yes.
4. Set WiFi Direct Mode to Enabled so that if the initial LAN connection
fails, a Wi-Fi point to point connection will occur.
NOTES:
l
If WiFi Direct Mode is enabled, Login Code Mode must be
set to Random or to Use the following code, where a fixed
code is entered to login.
l
For the best user experience, Crestron highly recommends
setting WiFi Direct Mode to Enabled.
NOTE: For Miracast network requirements, best practices, and
troubleshooting, refer to the AirMedia Deployment Guide (Doc.
7693) at
3
AM-USB-WF/AM-USB-WF-I
Quick Start
AirMedia® USB Adapter with Wi-Fi® Connectivity