Crestron
AV2 & PRO2
2-Series Integrated Dual Bus Control System
Volatile
1. Digital, analog and serial signal values
2. SIMPL Program (prior to writing to permanent memory)
3. SIMPL+ Variables (Default if no options are specified, or if "volatile"
qualifier is used, or #DEFAULT_VOLATILE is used)
Initial Setup
NOTE:
For the Ethernet IP setup of the 2-Series integrated dual bus control system
with the optional Z-BUS expansion card, refer to the C2ENET-1 & C2ENET-2
Operations & Installation Guide (latest revision of Doc. 5962) for further
information.
To avoid any procedural errors,
follow the steps in the order
provided.
After installing the desired development tool, various job files may be obtained from
Crestron or other sources. Using Windows Explorer, complete the following steps.
These steps ensure that all job files reside on the hard drive (C:) in a directory named
\CRESTRON\PROJECTS\MYJOB.
1. Navigate to the SIMPL directory on the hard drive. Assume that the
default install directory is C:\CRESTRON.
2. Create a new folder for the project files. Although the folder where the
files are placed is not critical, it is easier to manage projects if a logical
structure is created. For example, create a new folder, called
PROJECTS, underneath the CRESTRON directory. Create another
folder, called MYJOB, under PROJECTS for the current job. The
resulting pathname is C:\CRESTRON\PROJECTS\ MYJOB.
3. Copy the supplied files into the folder created in the last step. The
source of the file determines the procedure.
From an EXE file:
If a job is downloaded from the Crestron website
or is received via email, all files may have been compacted into a
single, self-extracting archive. This archive has an EXE extension.
First, copy the EXE file into the directory stated in step 1, then double
click on the file name to begin decompressing the file. The program
asks for a location for the extracted files. In this case, simply browse
for the same directory where the archive was copied. (Once files are
extracted, retain the original EXE file in case files need to be restored
at any point.)
From a ZIP file:
If the downloaded job is from the Crestron website or
email, all files may have been compressed into a single archive file
with a ZIP extension.
NOTE:
The ZIP file was created with the Copy Program feature of
SIMPL Windows, which provides the option to archive the project to a
ZIP file. The command is initiated in SIMPL Windows via
File | Copy
Program
. An example of the "Copy Program" window is shown after
this note.
Operations Guide - DOC. 5957
Integrated Dual Bus Control System: PRO2 & AV2
•
23
Summary of Contents for 2 Series
Page 1: ......
