2-Series Integrated Dual Bus Control System
Crestron
AV2 & PRO2
The Date Set submenu, shown after this paragraph, permits alterations to the current
system date, shown on the top line. Use the Dn (down) and Up selection buttons for
month, day, and year decremental or incremental changes, respectively.
Date Set Submenu
The Time Set submenu, shown after this paragraph, permits alterations to the current
system time, shown on the top line. Use the Dn (down) and Up selection buttons for
hour and minute (Min) decremental or incremental changes, respectively. The
AM/PM selection button toggles between AM and PM.
Time Set Submenu
COM
This button allows the user to monitor the transmission and reception traffic on every
COM-type device and card that is active in the SIMPL Windows program which is
loaded into the 2-Series control system. This includes all devices connected via
Cresnet (eg. ST-COM) and Ethernet (eg. CEN-COM) as well as the built-in card
(slot 4) and cards inserted into the expansion slots (eg. CNXCOM-2 and C2COM-3).
Serial transmission to IR ports can also be monitored. Refer to "COM Analyzer" on
page 41 for details.
NOTE:
Only COM-type devices and cards in the SIMPL Windows program that are
active (not commented out) are monitored.
Leading Specifications
The tables after this paragraph provide a summary of leading specifications for the
2-Series integrated control systems.
10
•
Integrated Dual Bus Control System: PRO2 & AV2
Operations Guide - DOC. 5957
Summary of Contents for 2 Series
Page 1: ......
