2-Series Integrated Dual Bus Control System
Crestron
AV2 & PRO2
RELAY OUTPUT
Relay Output Connectors
RELAY
S7
1
2
3
4
OUTPUT
5
6
7
8
On the rear panel there are eight normally open, isolated relays. Each relay is rated
1A, 30 VAC/DC; MOV arc suppression is provided across contacts for use with
"real world" loads.
100 – 240V ~ 2.4A 50/60 Hz (Power Supply)
Universal Power Supply Connector
100 240V
2.4A
Hz
60
50
On the rear panel there is an internal universal power supply connector. Use the
supplied power cord to connect to an AC outlet.
2 Series Indicators
A number of indicators are provided on the front panel of the 2 Series integrated
control systems. Refer to the description of each below.
PWR (Power)
This LED illuminates when the unit is connected to and receives power from an AC
outlet.
NET
This LED illuminates when the central processing unit is processing or
communicating with Cresnet devices (i.e., button pressed at Cresnet panel or data
received from Cresnet panel).
ERR
This LED illuminates when an error condition is detected. This may be the result of
hardware or software failure, missing/wrong card placed in a slot, or a programming
error. To decipher content, examine the message available from the menu function
buttons.
NOTE:
The LAN LEDs are active only if a single port or dual port Ethernet card
(which is field installed) occupies the Z-BUS slot.
LNK A, LNK B (LAN)
These LEDs illuminate when there are attachments to the respective port on the
Ethernet card.
ACT A, ACT B (LAN)
These LEDs illuminate when there is communication (activity) at the respective port
on the Ethernet card.
6
•
Integrated Dual Bus Control System: PRO2 & AV2
Operations Guide - DOC. 5957
Summary of Contents for 2 Series
Page 1: ......
