-2-
CDVS-3032
1. Precautions
Cautions & Warnings
- Be sure to turn off the power before installation.
- Avoid rough handling or mechanical shock.
- Keep off 20 cm distance with other machines or electronic products.
- Keep away from direct rays of the sun or heater or similar devices.(it causes fire)
- Don’t put things such as vase, cup, cosmetics, bottle etc. on this product. (it causes fire, an electronic shock
hazard or an injury by falling)
- Don’t block the ventilating holes of this product with a kind of metal(ex : coins, hairpin, metal plate etc.) or
inflammable stuff(ex : match, paper etc.).(It causes malfunction of the product, fire and electronic shock hazard.)
- Don’t put a heavy-weight things on this product.(It causes an injury by falling)
- Fully insert power plug at outlet. (Uncertain connection causes fire.)
- Wipe smoothly with using dried cloth to clean the product. Don’t use any chemical products or detergent. This
may change the color of the product and spoil its surface .
- Stop using and turn off the power when odd smells or smokes comes out from the product. Then call your
nearest customer service. (continuous using may causes fire, an electronic shock hazard.)
- Don’t touch the power plug & cable with wet hand. (It causes electronic shock hazard.)
- Don’t pull power plug out by force. (Damaged power plug causes electronic shock hazard.)
- Keep away from the place of dust, humidity, soot when you install. These may cause malfunction of the product.
Be place dehumidifier near the product, remove dust from the fan of ventilate holes with compressed air every 3
months.(Dust & others may cause fire and electronic shock hazard.)
- Replace or clean front filter once of 3 months.
- Don’t drop or impact to the product.
- Keep this product away from strong magnetic fields or mechanical vibration.(It causes malfunction)
- Don’t install the product to extremely cold place.
- Install the product well-ventilated place.
- Don’t open the cover of product at your disposal. (It causes fire, an electronic shock hazard.)
- Don’t change the power supply switch at your disposal. (It causes malfunction and damage)
- Don’t press the product when front door open. (It causes transformation or damage of Front Door.)
- Put another supportable stuff not to damage BNC board. BNC board could be broken or damaged by the weight
of BNC cable.
- It causes danger of explosion if battery is incorrectly replaced.
- Replace only with the same or equivalent type recommended by the manufacturer.
- Dispose of used batteries according to the manufacturer’s instructions.
- Adjust power input switch correctly.(110V or 220V)
- Use stable transformer where expected unstable power supply.
- Ask your customer service when you add more devices on this product(ex: HDD, Back-up device)
Summary of Contents for CDVS-5432 Series
Page 1: ......
